Builder guide#
Contents
A Bitebox story is one graph of nodes and wires. The Canvas and your assistant edit the same graph, so anything the assistant builds you can open, change and play in the Canvas.
A good order of work#
workspace_contextto learn the grant, the node types and the publish format.project_list, orproject_create { "title": "<title>" }. A new project starts with a blank file.file_create { "projectId": "<projectId>", "path": "Episode 2.json" }adds another blank file; pass itspathto the document tools.document_getfor the head revision and the nodes.- Build in
document_applybatches, passing each newrevisionIdon. - To use your own clip as a scene, import it with
media_import_url, then callscene_addwith thesrcit answers. Pass"start": truefor the opening clip. Do not add an Import node for this: an Import node is the Canvas upload slot. It does not play and cannot be the start. Leave outxandy, and each new scene goes one column right of the scene it follows (from), or into the next free column.choice_addputs its card one column right of its clip. No new card covers another. document_getwith anodeIdto read a node's real input and output ids before wiring it.- Mark the first playable node with
document_set_start, and the final node withdocument_set_endif the story needs one. document_validatefor problems (errors stop play, warnings do not). It counts wires and references; passnodeIdto list the ones on one node, orincludeto list them all. Thendocument_arrangeto tidy the layout. Arrange leaves room for each card's real height, and a 9:16 clip makes a tall card. Collapse workflow (document_collapse_workflow) hides one or more nodes on the canvas. Playback and generation stay the same.preview_urlorplaythrough_simulateto play it.- To check a story that keeps score, such as a counter for wrong answers, send
playthrough_simulateamoveslist: the picks one viewer makes, in order. Each move isend(the clip plays to its end),choosewith arouteId, orclaimwith atriggerIdand anoptionId(a choice on an overlay). The answer'splaythroughlists each scene shown, where play stopped and the viewer state it ends in, for example"penalty.count": 2. A move the scene on screen does not offer is refused withmove-not-offered, and the refusal lists the moves that scene offers. Moves need thesimulate-movesflag; without it, a call with moves is refused withfeature-disabled. watch_through_startto play every path on the preview in a real browser on the server. It takes minutes; read the report withwatch_through_get, about once a minute, since each call also moves the watch-through on. Each path says whether it reached its ending, which choices showed and when, and any error. It drives clips joined by plays-on routes and Choice Overlay choices; any other path says "not driven" and why. If your assistant subscribed towatch_through.completed(events), it getspassorfailwhen the watch-through ends. Then it reads the report. A watch-through that does not start within 30 minutes ends, and the message saysfail. Then publish.
Hear when a job finishes#
An assistant can ask Bitebox to tell it when a job finishes, so it does not have to keep checking. This uses the MCP Events extension, by webhook only: Bitebox sends a signed message to a web address your assistant gives it.
events/listnames the events:generate.completed,generate.failed,watch_through.completedandpublish.status.changed.events/subscribewith the eventname,argumentswith theprojectId(and, if you want only one job, itsrunId,jobIdorpendingId), anddeliverywithmode: "webhook", anhttpsurland asecret. Your assistant makes the secret:whsec_and the base64 of 24 to 64 random bytes. Bitebox never makes one and never shows it again.- Before the subscription starts, Bitebox sends
{"type": "verification", "challenge": "<text>"}to the address. Answer200with{"challenge": "<the same text>"}. - Each event arrives as a signed POST with the Standard Webhooks headers
webhook-id,webhook-timestampandwebhook-signature, andX-MCP-Subscription-Id. Check the signature on the raw body before you read it.webhook-idis the event'seventId. Answer2xxonce you have stored it. - Call
events/subscribeagain with the same values beforerefreshBeforeto keep it.truncated: truemeans some events were lost; read the job withgenerate_status,watch_through_getorpublish_status. Those reads still work without a subscription. events/unsubscribewith the samename,argumentsanddelivery.urlstops it.
publish.status.changed arrives when a publish request is published, canceled or expires, usually within two minutes. It carries the projectId, the pendingId and the status. A published request also carries url, the public page link that publish_status shows, and publicationId. A request that is replaced by a newer ask arrives as canceled. Nothing arrives while the request is still waiting for the creator.
generate.completed arrives when a run's file is on its node or in the project's media, even if your assistant never calls generate_status again. It carries the projectId, the runId and status: "completed". A result on a node also carries the nodeId and the revisionId that holds it. A file on no node carries its id in mediaIds, the same id media_list shows. generate.failed arrives when a run fails or is canceled. A run on a node that fails while nobody checks it is the one exception: it arrives only after generate_status takes the run's running mark off the node. Each run sends one event.
A subscription needs the same access as its read. A project outside your agent token answers "Not found.", the same as a project that does not exist. If Bitebox cannot reach your address, it tries again for about 15 minutes, then sends {"type": "gap"} before the next event. When the agent token is revoked, Bitebox sends {"type": "terminated"} and stops.
Tell your media apart#
media_list answers a name for each file: the name it was uploaded with, the file name in its import URL, or the generate run id that made it. A file with no name answers null, for example one stored before names existed. An assistant can name or rename a file with media_complete. The MCP does not describe what a clip shows. An assistant can read frames from the file's src, which is free, or run a media_review audit, which costs credits.
Watch an agent work#
Keep the project open in the Canvas. Each change appears as the assistant makes it, and a line at the top of the Canvas counts the changes. The count goes up for the whole task. The line changes to "made" after 30 seconds with no change.
Revert changes undoes the whole task in one step, generated results included. Before it runs, a confirm box lists each node the task added or edited. The revert is a new save, so the task stays in Earlier versions. A task is every change the assistant makes with no gap over 5 minutes, and a generate that is still running keeps the task open. A new task starts if you edit the File yourself, run a model yourself, or another assistant writes to it, so Revert goes back only as far as the last of those. To go back further, use Earlier versions. An assistant can also set agentRun on document_apply to group its changes itself.
Revert does not undo credits or stored files:
- A result already on a node comes off the node. The run stays charged. Earlier versions can bring the result back, and
generate_statuswith the run's id still answers itssrc. - A result still on its way when you revert does not land on the node. The run finishes and stays charged. When the run finishes, the file joins the project's media, so
media_listshows it even if your assistant never checks the run again.generate_statusanswersnode.reverted: truewith the file'ssrc. A text run answersreverted: truewith its text.
Compare and name versions#
document_revision_get reads one earlier version, and document_diff lists the nodes, properties and wires that changed between two versions.
document_checkpoint_set names a version, as Earlier versions does in the editor. It adds and removes no version. A name or note already on a version can be yours, so your assistant cannot change or clear it. It asks you to do that in Earlier versions.
Copy nodes from another File#
document_paste_nodes copies nodes into a File, as Copy and Paste do in the editor. The source can be the same File, another File, or another project your grant covers. The copies get new ids and keep the wires between them. Wires to nodes you did not copy are cleared. The source does not change.
Some nodes cannot be copied yet: a node with tags, and a Choice Overlay. The tool refuses them and writes nothing. Copy them in the editor, or build them with document_apply.
Replace a whole File#
document_replace swaps a File's whole document, as Import JSON and Apply JSON do in the editor. Prefer document_apply for an edit. Pass the head from document_get as expectedRevisionId.
- It adds a new version. The old version stays, and
document_restorebrings it back. - A stale head returns a conflict and writes nothing. It never merges.
- It refuses what
document_applyrefuses: a loop that the story cannot play, a new wire between nodes that can't connect, and a node type that is switched off for you. It also refuses to remove a series bible. - A refused wire is named in the answer. A wire that was already marked invalid in the File can stay, so you can still edit that File.
- Fields the catalog does not know stay in the File.
Restore an earlier version#
Use document_revisions to find an earlier revision. Send it to document_restore with the current head as expectedRevisionId.
The restore creates a new revision and keeps the old history. A stale head returns a conflict.
Pass the same idempotencyKey when retrying after a lost response.
Keep the Canvas open during the restore. It shows the restored version without a reload. Open Projects → Earlier versions to inspect the restore's connection label, time, revision and run. These facts remain after reload. The run banner on the Canvas does not remain after you reopen the project, so read the run in Earlier versions. If the Canvas misses the live update, it catches up on its next check of the latest revision and still opens the run banner. A run that ended before that check shows what it made instead of showing the agent as still editing. Your latest revision selection stays selected when history refreshes. Older revisions without recorded attribution keep their original unknown identity.
Wiring nodes#
Two nodes join when you connect an output of one to an input of the other. Read both nodes' endpoint ids with document_get; never guess an id from a label. A wire that closes a loop in the story is refused: going back to an earlier scene is a choice at play time, not a wire. Choices and overlay options are lists on a node: add the item first, then read the node again for its new port.
A Video's branches are a list too. node_configure with add-branch adds one, and remove-branch with itemId (the exit id from document_get) removes one. A Branch with no trigger wired is an error in document_validate, so remove a Branch you do not use. remove-branch disconnects the Branch's own wires first; a Target Overlay or Choice Overlay it owned stays on the Canvas without an owner, so wire it to another exit or delete it. The other branches keep their ids and wires. The Video's Storyline exit stays: remove-branch refuses to remove the only one.
A clip's Storyline output (exit:exit.<id>.autoplay) holds one destination: a new wire from it replaces the old one. To give a clip its next scene and several overlays, keep the next scene on the Storyline output and run node_configure add-branch once per overlay. Connect each new exit:<id> output to one overlay's owner input. The player shows every overlay on the clip. A Storyline output connected to a pulse-in input is refused, because that input takes only a Pulse. A story saved before 2026-11-06 may still hold that wire as next with nextEndpoint: "pulse-in"; it stops the story there, so disconnect it or connect the Storyline to a story-in input.
An owner input holds one owner, and a new owner replaces the old one. A wire that cannot own the node is refused and leaves the owner in place. That includes a File output, and a Storyline from a Set, a Conditional or another node that is not a clip. A Timestamp or Choice Overlay takes only a clip's Branch, so run node_configure add-branch on the clip and connect the new exit:<id> output instead. Moving a valid wire with document_repair_reference follows the same rule. A move that stays invalid leaves the working wires on that input, and a move never clears the other wires on its own output. In a project saved at spec 0.3 or 0.4, a new owner also removes the old owner's Branch, because those files cannot hold an empty one.
A connect whose output type the input does not take is refused, and nothing is saved. A move with document_repair_reference onto such an input is refused too, and the wire stays where it was. The refusal names the type the output gives and the types the input takes, so connect a matching output or pick another input. A connect the types allow but the nodes do not is refused the same way, with "These nodes can't connect. No wire was saved." In the editor, the same wire stays on the Canvas, marked invalid, so the author can see it. Any other connect answer names the wire the document saves. When the answer says the wire is invalid, document_get shows that same wire, on the input you named, marked invalid.
Clean up text between nodes#
Put a Transform Text node between a text source (Prompt, Text or Generate Text) and the input that reads it. Set operation with document_apply (patch-node-content) and the fields that operation uses:
operation | Fields |
|---|---|
case | to: upper, lower, sentence or title |
trim | none: removes spaces at the ends and makes each run of spaces one space |
shorten | max, unit (characters or words), ellipsis (true or false). It never cuts inside a word. |
replace | find, replaceWith, usePattern (read find as a pattern; $1 inserts group 1), ignoreCase |
extract | pattern and group (0 is the whole match), or leave pattern empty and set jsonPath, such as answer.title |
slice | start and end character positions |
The result is ready as soon as you save; there is no Run and no charge. Patterns use RE2 syntax, so look-around and back-references are refused. A pattern holds at most 200 characters: a longer one is refused and the message names the limit. The node reads at most 20,000 characters of input.
Transform Text does not read an Adjudicator's outputs (its options, Labels or Prompts) yet, directly or through a Router: that wire is refused with transform-text-adjudicator-source. Wire the Adjudicator to the generate tile or Parallel Choices directly.
Build one text from pieces#
A Combine Text node fills a template from up to four text sources wired to its inputs A to D. Set template with document_apply (patch-node-content): {a} to {d} insert the inputs, and a doubled brace writes one brace (two opening braces give {, two closing braces give }). The default is {a} {b}. With separatorWhenEmpty set to collapse (the default), an input with no words is dropped with the comma or space next to it, so {a}, {b} with nothing on B gives only A. Set it to keep to write the template as it is. A template holds at most 4,000 characters; a longer one is refused. Wire the output into a generate tile's prompt, Generate Text or another text node. There is no Run and no charge. Combine Text does not read an Adjudicator's outputs yet, directly or through a Router: that wire is refused with combine-text-adjudicator-source.
Generate from frames#
Wire an image to First frame to animate that image. Wan 2.5 Fast, Happy Horse and legacy Video Gen accept one first frame. Their Last frame input is unsupported. A connected last frame stops the run before a quote or credit hold, including connections saved in older documents.
Omni 1.1 Flash and Kling 3 accept a first frame and an optional last frame. A last frame needs a first frame. Gen 4.5 accepts one first frame; a connected last frame stops the run before a quote or credit hold. Kling 3 also takes its output shape from the first frame, so its Aspect ratio applies only to prompt-only runs. A first frame does not change the price. For Wan 2.5 Fast and Happy Horse, the first frame sets the output shape. The inspector hides Aspect ratio while that frame is connected. Older saved aspect settings stay in the document and apply only to prompt-only runs.
Wan prompts allow 1,500 characters; Happy Horse allows 2,500. Overlong prompts stop the run without changing saved text.
| First-frame tile | Image limits |
|---|---|
| Wan 2.5 Fast | Each side is 240–8,000px; at most 25 MiB. |
| Happy Horse | Each side is at least 300px; aspect is 1:2.5 to 2.5:1; at most 20 MB. |
| Legacy Video Gen | Exactly 768x512px (3:2 landscape). |
The server reads bounded media headers to check these limits. If it cannot measure an image, it refuses the run without a credit hold. Upload a JPEG, PNG or WebP frame.
Legacy Video Gen makes a 768x512 (3:2 landscape) video from a first frame. It has no 9:16 or other aspect option. A first frame of any other size, including a 9:16 still, stops the run before a quote or credit hold. The server never crops, resizes or stretches the image, so wire an image that is already 768x512. Saved Video Gen nodes keep their wires, and prompt-only runs do not change.
Generate Text#
Generate Text writes words from a Prompt, an optional System Prompt, and up to four images or four videos. Set model to one of these ids. Each model has its own flat price per run.
| Model | model id | Takes video |
|---|---|---|
| Gemini 2.5 Flash | google/gemini-2.5-flash | Yes |
| Gemini 3.8 Flash | google/gemini-3.8-flash | Yes |
| Claude Sonnet 5 | anthropic/claude-sonnet-5 | No |
| Claude Opus 5.5 | anthropic/claude-opus-5.5 | No |
| GPT-6 Sol | openai/gpt-6-sol | No |
| Seed 2.1 Turbo | bytedance-seed/seed-2-1-turbo | No |
maxTokensis Output length: the longest answer the model may write, from 256 to 8,192 tokens. The default is 2,048. The server moves a value outside that range to the nearest limit. The price stays the same.reasoningis on or off.- A video on a model that can't take video stops the run before a credit hold. The message names the model.
Example: set GPT-6 Sol, Reasoning on and a 4,096-token answer on a placed Generate Text node, then run it. The run reads the node's settings and its wired Prompt.
{ "tool": "document_apply", "arguments": { "projectId": "<project>", "commands": [
{ "type": "patch-node-content", "patch": { "nodeId": "gen.text", "expectedDefinitionId": "generate-text", "edits": [
{ "operation": "set", "path": "/props/model", "value": "openai/gpt-6-sol" },
{ "operation": "set", "path": "/props/reasoning", "value": true },
{ "operation": "set", "path": "/props/maxTokens", "value": 4096 }
] } }
] } }
{ "tool": "generate_run", "arguments": { "projectId": "<project>", "runs": [{ "nodeId": "gen.text" }] } }
Put a sound on a clip#
Add Audio puts up to two sounds on a clip; Extract Audio gives a clip's sound as its own file. Wire the clip into Clip (input) and the sounds into Sound (sound) and Sound 2 (sound-2). On Add Audio set mode (replace or mix), mixLevelDb (−60 to 6, the clip's own sound in mix) and offsetMs (0 to 60 000, when the wired sounds start) with patch-node-content. The result is as long as the clip.
Bake either node with node_run, then poll node_run_status with the runId until done. An unwired Clip answers node-input-missing naming Clip. Extract Audio on a clip with no sound track ends the run failed with code: "no-audio-stream". Add Audio with no sound wired is an identity: the clip passes through and nothing is written.
Media addresses#
A video or image source must be a full https:// address or a path from the site root that the player can load. A path relative to the story file plays a black frame. Upload or import media through the media tools so it is hosted.
Make it for phones (9:16)#
- Bitebox plays portrait 9:16. Set generate tiles to 9:16 unless you want another shape; 16:9 shows small on a phone.
- Keep the bottom quarter of every frame clear of faces and key action. Choice buttons sit there.
- Group characters in the centre, and put sign or screen text in the middle third.
Prompting tips#
- Keep readable words out of generated pictures where you can. Models garble text.
- For dialogue, name one speaker and one quoted line, ask for it in the first two seconds, and say who keeps their mouth closed.
- Describe only what is there. Naming something to exclude it (“no badge”) tends to add it.
- The reference image sets the composition. Position people and props in the still, not in the video prompt.
- Each model has its own rules.
generate_modelsreturns them aspromptingRules; have your assistant read them before writing a prompt. - With a first frame, Seedance 2.5 follows that image's shape, including saved Seedance 2.5 Image nodes. Omit
aspect_ratioor use"auto"in requests. A fixed aspect is refused before any quote or spend. - H3, H3 Max, and H3 Max Turbo also follow the input image's shape. Their aspect setting applies to text-only runs.
- Stable Audio 2.5 offers 4, 6, or 8 quality steps. Canvas resolves old unsupported selections to a supported default. Direct requests refuse them before spending.
- Flux 3 keeps Auto duration and sends explicit seconds as numbers. MiniMax Music 3 needs lyrics, or
[instrumental]on its own line. - ElevenLabs Speech (
elevenlabs-speech) speaks a wired Prompt. Voice model is ElevenLabs v4, HeyGen Voice Turbo, or HeyGen Voice standard. Keep the same Voice for a character. Changing Voice model does not rewrite a saved voice. - Reference clips must fit the model's length limit. MiniMax H3 Reference takes 2 to 15 seconds a clip and 15 seconds in total. Seedance 2.0 Reference takes 2 to 15 seconds in total. Seedance 2.5 Reference takes 1.8 to 30.2 seconds a clip and 30.2 seconds in total. Wan 3 takes 15 seconds or less in total. A clip outside the limit is refused before any quote, even by a fraction of a second. See reference clip length.
- Auto Subtitle and Styled Subtitles read the video's speech. They do not use a prompt.
- For a clip that passes through set stills, use Flux 3 Max Keyframes (
flux-3-max-keyframes). Pass up to 9 stills in story order asimageUrlswithreferenceMediaimage. The first lands on the first frame, the last on the final frame, and the rest are spaced evenly between. For a single start frame (and an optional end frame), use Flux 3 Max (flux-3-max) withimageUrlandendImageUrl; an end frame alone is refused. - To redo a clip's sound (cut unprompted music, keep dialogue, add synced SFX), use Mirelo SFX 2.0 (
mirelo-sfx-2-0): wire the Video, optionally a Prompt, then run. Duration follows the clip (the baked edit file when one is wired), up to 10 minutes. A clip shorter than 1 second is refused before any quote. The baked mix replaces the clip's original track. The player shows the wired clip's picture, muted, while the mix plays. If the mix cannot play, the clip plays with its own audio. The mix is tied to the clip file sent at Run. A later rewire plays that new clip's own audio. Prompt text is experimental guidance Mirelo may not always follow. For a sound effect from text only, use Mirelo SFX (mirelo-sfx-2-0-text). That tile mixes as a bed and does not mute a clip. Duration there is up to 10 minutes.
Connect video frames#
Wan 3 and Flux 3 can animate a first frame or connect first and last frames. Connect a first frame before you connect a last frame. For Flux 3 with both frames, choose a duration from 5 to 20 seconds. Auto is refused before charging. Grok Imagine accepts a first frame. A last-frame wire is refused before charging, including wires saved in existing stories.
Keep a character or scene with Wan 3#
Wan 3 also takes up to 9 references: stills of a character or a scene, or video clips.
Pass them as imageUrls with referenceMedia image or video.
In the prompt, name them by medium and order, for example "the woman in Image 1 walks past Video 1".
References do not combine with a first or last frame. A run with both is refused before charging.
Clips total 15 seconds or less, and the price adds each clip's length to the output length.
Wan 3 does not take sound references. A sound reference is refused before charging.
On a reference run, Expand prompt and Think first start off.
Edit or continue a clip with Flux 3#
Wire a clip into Flux 3's Video input to change it or to carry it on. The Clip setting picks the job:
- Edit re-renders the clip from your prompt. Say what to change; the rest stays as it was. The result keeps the clip's length, so the price follows the clip: $0.03 per second of clip. Edit has no other settings.
- Continue makes new footage that starts where the clip ends. Describe what happens next. Duration, aspect ratio, quality and audio apply. The price is the new footage's length at $0.41 per second (720p) or $0.53 (1080p). Duration starts at 5 seconds; Auto is priced at the 20-second maximum.
The clip must be under 15 seconds; Edit also needs at least 0.7 seconds. A clip outside that is refused before any quote, and the message names the clip, Flux 3 and the limit. Draft does not work with a wired clip, and a clip with a first or last frame is refused. Over MCP, set /props/generate/input/clip_mode to "edit" or "continue"; with no value, the run edits.
Draft, then Finish#
Seedance 2.5, Seedance 2.5 Reference and Flux 3 have a Draft setting. A draft take runs the prompt at preview quality for less, so you can check the motion before you pay for the full render. The card and the receipt say Draft. When you like a draft, Finish re-renders that same take at full quality (1080p). Finish shows its price first, and the finished clip becomes the node's result. The draft stays in the take history.
Your assistant does the same with generate_finish:
- Run the draft:
generate_run { "projectId": "<projectId>", "runs": [{ "nodeId": "<node>" }] }with the node's/props/generate/input/draftset totrue. Record therunIdand the receipt's cost fromgenerate_status; the receipt carriesdraft: true. - Quote the Finish:
generate_finish { "projectId": "<projectId>", "nodeId": "<node>", "quoteOnly": true }. The price is the tile's full-quality row at 1080p for the draft's own length. A draft made with a video reference also bills that video: 0.6 × (input + output seconds). - Finish it: the same call without
quoteOnly. Poll the newrunIdwithgenerate_statusand record its cost.
A Finish runs the draft's own length; a different duration is refused. A run that is not a finished draft take on that tile is refused with not-a-draft-take, and nothing is quoted or spent. node_run does not finish drafts.
A draft on Seedance 2.5 or Seedance 2.5 Reference can be finished for 14 days. After that, Finish is refused with draft-expired and nothing is spent.
Keep a character or edit a clip with Happy Horse#
Happy Horse also takes up to 9 reference stills of a character or a thing.
Pass them as imageUrls with referenceMedia image.
In the prompt, name them in order as character1, character2.
To edit a clip, wire it to Video (videoUrl) and say the change in the prompt.
You can add up to 5 reference stills to an edit. Name them as @Image1, @Image2.
The edit keeps the clip's length and shape, so it has no duration or aspect setting.
Sound set to Auto makes new sound; Keep original keeps the clip's own sound.
The clip must be 3 to 15 seconds. A clip outside that is refused before charging.
The price counts each second of the clip twice, because the provider bills the clip you send and the clip you get back.
A first frame does not combine with references or a clip. Video and sound references are refused. Both are refused before charging.
Make or edit a clip with Kling 4#
Kling 4 makes clips of 3 to 30 seconds at 720p or 1080p. It picks how to run from what you wire:
- A prompt alone makes a new clip.
- A First frame, with or without a Last frame, animates between them. The first frame sets the shape, so Aspect ratio is hidden.
- A last frame alone, or up to 8 reference stills, makes a clip that keeps those subjects. Pass stills as
imageUrlswithreferenceMediaimage, and name them in the prompt in order as @Image1, @Image2. Stills combine with first and last frames. - A clip on Video (
videoUrl) runs an edit. Name it in the prompt as @Video1. You can add up to 8 reference stills. The edit keeps the clip's length, so it has no duration or aspect setting. The clip must be 3 to 30 seconds.
The edit price counts each second of the clip twice, because the provider bills the clip you send and the clip you get back.
A first or last frame does not combine with a clip. Video and sound references are refused. Both are refused before charging.
Existing Veo 3.1 nodes#
Veo 3.1 is retired and is no longer offered for new authoring. Existing nodes keep their settings, connected inputs and generated videos. Those videos still play. A new generation attempt shows a retirement message before any credits are held. Choose another video model to generate a new clip. Keep the saved Veo 3.1 node until you have replaced its role in your story.
Existing H3 Max Director nodes#
H3 Max Director is retired and is no longer offered for new authoring. Existing nodes keep their settings, connected inputs and generated videos. Those videos still play. New generation attempts show a retirement message before any credits are held. Existing generation requests can still be checked or cancelled. If the video finished but could not be saved, retry the same run to save it. Recovery checks the owner and model, uses the saved output, and does not start another job. A run waiting for confirmation keeps its waiting or reconciliation status. If the provider names that run later, checking it resumes normally. Choose another video model to generate a new clip. Keep the saved Director node until you have replaced its role in your story.